How you can Mount a Sump Pump

A sump pump is used in areas such as attics and crawl areas to eliminate unwanted water. , if disregarded this water can ultimately cause major property damage as well as pose a serious health danger.

.

A sump pump will automatically pump this water out and away from the construct. A common sump pump will consist of the pump itself, a power supply, and a sump pit. The pit can be built of concrete or it can be a pre-fabricated plastic or rubber material created for your application.

Sump pumps are available in a wide array of sizes depending upon the quantity of water you will need to remove at what frequency. While the size of the pump will differ, there are generally just two types of sump pumps.

Kinds of Sump Pumps

A pedestal sump pump will be the more affordable of your 2 options. On this type the pump motor sits atop a pedestal (pole) which is linked to the pumping system at the base of the pedestal. When the water reaches a certain depth on the pedestal the motor is triggered and the water drained.

The second type of pump is the submersible pump. With a submersible pump the motor and pumping mechanism both being in the water and can be absolutely immersed without causing damage to the system. Which type you pick will depend on your needs as well as your budget plan.

Setting up the Sump Pump


Select the location of the sump pump thoroughly. It needs to lie where the water tends to gather or where ground water permeates up into the basement or crawl space. The primary step is to dig a hole big enough to accommodate your pit liner.

If you are attempting to capture ground water prior to it can reach the surface you will wish to install gravel around the liner which must likewise have holes or permeable product which will allow the water to get in the liner.

When the liner remains in place, center the pump in the base of the pit. It using a pedestal style pump be certain the pump is safe and secure and will not topple when the motor is triggered.

Powering Your Sump Pump

Check the amperage on the pump and choose an appropriate sized breaker switch for your unit. The sump pump must be on a dedicated circuit, implying absolutely nothing else needs to be powered by that same breaker.

For added security, the outlet utilized to plug in the pump must be a GFCI (Ground Fault Circuit Interruption) gadget. These devices offer added security in the event of an other or short accident.

Sump Pump Drain

The drain line for the sump pump must take a trip the fastest possible path. The longer the drain line the more water the pump will be needed to push, therefore increasing the pressure on the pump.

If your home is on a septic system you must not path the drain line to the septic system or have it drain in the area of the septic field lines.

The excess water will cause a strain on the septic tank. CPGC In some locations it is also an infraction of codes to tie in the drain line from the sump pump to your sewer connection.

Check your regional codes to be specific prior to making any connections of this type.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “How you can Mount a Sump Pump”

Leave a Reply

Gravatar